Product Name : BT/EOC COLLET CHUCK
Product Introduction
  • Each collet chuck has been locked with a nut, but not including a spanner and collet.
  • The draw bar thread can make pull studs locked precisely and easily, including 45°, 60°, and 90°.
  • Suitable for heavy-duty cutting.
  • Superior right angle: It provides perfect processing surface during the process on the machine table.
  • The pre-balance can reach G6.3 10,000 rpm, without an inspection report.
  • The balancing grade and revolution can be done according to customer's request but the additional charge is needed.
  • While ordering, Power Good Nuts could be purchased separately for combination.

 

MODEL NO.TYPELl1l2d1TSIZE RANGEWEIGHT (KGS)
SYIC - 16001 BT30 x EOC25 - 70 118.4 70 48 60 M12 x 1.75P 3.0 ~ 25 1
SYIC - 16021 BT40 x EOC25 - 70 135.4 70 40.5 60 M16 x 2.0P 3.0 ~ 25 1.38
SYIC - 16023 BT40 x EOC25 - 100 165.4 100 70.5 60 M16 x 2.0P 3.0 ~ 25 1.74
SYIC - 16026 BT40 x EOC25 - 120 185.4 120 74.5 60 M16 x 2.0P 3.0 ~ 25 1.74
SYIC - 16027 BT40 x EOC32 - 90 155.4 90 63 72 M20 x 2.0P 4.0 ~ 32 2
SYIC - 16029 BT40 x EOC32 - 105 170.4 105 78 72 M20 x 2.0P 4.0 ~ 32 2.2
SYIC - 16031 BT40 x EOC32 - 120 185.4 120 93 72 M20 x 2.0P 4.0 ~ 32 2.45
SYIC - 16041 BT50 x EOC25 - 85 186.8 85 44.5 60 M16 x 2.0P 3.0 ~ 25 4.4
SYIC - 16043 BT50 x EOC25 - 100 201.8 100 59.5 60 M16 x 2.0P 3.0 ~ 25 4.8
SYIC - 16046 BT50 x EOC25 - 120 221.8 120 77 60 M16 x 2.0P 3.0 ~ 25 5.2
SYIC - 16047 BT50 x EOC32 - 90 191.8 90 44 72 M24 x 2.0P 4.0 ~ 32 4.6
SYIC - 16049 BT50 x EOC32 - 105 206.8 105 59 72 M24 x 2.0P 4.0 ~ 32 4.85
SYIC - 16051 BT50 x EOC32 - 120 221.8 120 74 72 M24 x 2.0P 4.0 ~ 32 5.35