SAR Angle Head Holder

SAR Angle Head Holder
Product Name : SAR Angle Head Holder
Product Description
proimages/taper_icon/BT_SBT-icon..jpg proimages/taper_icon/CAT_SCAT-icon..jpg proimages/taper_icon/DAT_SDAT-icon..jpg

For heavy-duty cutting

  • Coolant feed through dowel pin into the body, coolant outlet from a coolant nozzle.
  • Maximum revolution: 3000rpm
  • Maximum torque: 50N･m
  • Recommended cutting depth ≤ 4mm
  • Maximum coolant pressure: 7kgf/cm2
  • Workable for ATC automatic tool change system
  • Direction of rotation: same as machine spindle
  • Gear ratio 1:1
         proimages/Products/Angle_head_holder/SAR/SAR-feature_picture2..jpg
series:

SAR ANGLE HEAD HOLDER (SBT TYPE) FOR HEAVY-DUTY CUTTING

proimages/Products/Angle_head_holder/SAR/SAR-SBT_TYPE_figure..jpg

MODEL NO.TYPELSTORQUEWEIGHT
(KGS)
5012-643-302-230 BT50xSAR50/SBT30-230 230 80 50 N-m 16.1
5012-643-303-230 BT50xSAR50/SBT30-230S 230 110 50 N-m 16.1
5027-643-302-230 SBT50xSAR50/SBT30-230 230 80 50 N-m 16.1
5027-643-303-230 SBT50xSAR50/SBT30-230S 230 110 50 N-m 16.1
5032-643-302-230 CAT50xSAR50/SBT30-230 234.95 80 50 N-m 16.1
5032-643-303-230 CAT50xSAR50/SBT30-230S 234.95 110 50 N-m 16.1
5044-643-302-230 SCAT50xSAR50/SBT30-230 234.95 80 50 N-m 16.1
5044-643-303-230 SCAT50xSAR50/SBT30-230S 234.95 110 50 N-m 16.1
5052-643-302-230 DAT50xSAR50/SBT30-230 235 80 50 N-m 16.1
5052-643-303-230 DAT50xSAR50/SBT30-230S 235 110 50 N-m 16.1
5067-643-302-230 SDAT50xSAR50/SBT30-230 235 80 50 N-m 16.1
5067-643-303-230 SDAT50xSAR50/SBT30-230S 235 110 50 N-m 16.1
series:
proimages/New-Product/SAR_Angle_Head_Holder-en-600.jpg


proimages/Products/Angle_head_holder/SAR/SAR-TI.jpg
series:
How to Install SAR Angle Head Holder on a Machining Center